Canon REALiS WUX4000 D, User Manual

Page: 51 / 188

51
Adjusting the Image
User’s Manual
Projectin
g
an Ima
g
e
■ Mac OS X
1
Open the Apple Menu and select [System
Preferences].
2
In the [System Preferences] window, click
the [Displays] icon to display the Display
window.
3
Select the [Display] tab and select “1920 x
1200” or the resolution closest to the out-
put signal resolution of the computer from
the [Resolutions] list.
4
Close the [System Preferences] window.
AUTO PC
If the image display is shifted or there is flickering of the screen when [Analog PC] is
selected, press the
AUTO PC
button to adjust the projector to the optimal condition.
The adjustment results will be stored. If the projector is used again with the same com-
puter, when the input signal is selected the image will be projected automatically under
the same conditions that were previously adjusted.
■ Performing the Auto PC Function
Press the
AUTO PC
button to perform projector adjustment.
If the projected image was not properly adjusted with the Auto PC function, perform the fol-
lowing steps.
• From [Input signal select], select an input signal type based on the resolution of the com-
puter. ( P78 )
• If the adjustment is still insufficient, from [Input signal settings] select [Total dots], [Track-
ing], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] to
make adjustments. (
P79 - P81 )
• For the signal types supported by the projector, see the table on page 175 .
Remote control