Canon REALiS WUX4000 D, User Manual

Page: 137 / 188

137
Installation Manual
Connecting to a Networ
k
Network Settings on the Projector
From the projector menus screen, network
settings can be configured on the [Net-
work Setting] tab. For the menu opera-
tions, refer to “How to Use Menus” (
P74 ).
Locking the Network Settings
[Network setting lock]
You can lock / unlock the network settings
so that they cannot be changed and cancel
the lock.
After the
OK
button is pressed to confirm
and the
MENU
button is pressed to close
the window, the lock is re-engaged. If you
change the network settings, be sure to
continue operating without closing the
window.
• [Lock] is the factory default.
• For the default network password, refer to
page 139 .
Unlock
Cancel the lock and allow other
network settings to be changed.
The password must be entered
in order to cancel the lock.
When [Unlock] is selected, the
window shown below appears.
Use the [ ], [ ], [ ] / [ ] but-
tons to enter the 4-digit pass-
word.
Lock
Lock the settings.
Network Setting
Network setting lock
Forcibly canceling the network lock
In the Network Password Input screen, press the
buttons in the following sequence to cancel the
lock: [
] [OK] [ ] [OK] [ ] [OK]. This will reset
the network password to [ ] [ ] [ ] [ ].