Canon REALiS WUX4000 D, User Manual

Page: 161 / 188

161
Installation Manual
Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following mes-
sage (two types) is displayed for 10 seconds every time the projector is turned on.
2,700 hours to less than 3,000 hours
Prepare the new lamp when this screen is displayed.
• Only the [ ], [ ],
OK
and
POWER
buttons are available while this screen is displayed.
• When you press the POWER button, “Push POWER button again to turn off power.”
message appears.
• After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
• This message will not be displayed again if you select [Cancel] in response to the mes-
sage “Do you want to display this message again?”.
3,000 hours or more
If this screen is displayed, replace the lamp by referring to the procedure on page 162 .
• Only the
POWER
button is available while this screen is displayed.
• When you press the
POWER
button, “Push POWER button again to turn off power.”
message appears.
• When this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
• You can check the usage time of the lamp in [Lamp counter] in the [System settings]
menu. ( P107 )