Canon opture S1 Instruction Manual Download

Page: 16 / 204

Preparation

Step 1: Preparing the Power Supply

The camcorder can be powered by a battery pack or be connected to a household power
source. Charge the battery pack before use.

Attaching the Battery Pack

1. Turn the power switch to OFF.

2. Slide the OPEN button towards the

camcorder and open the LCD
panel.

3. Attach the battery pack to the

camcorder.

• Remove the terminal cover of the

battery pack.

• Slide in the connector end of the battery

in the direction of the arrow and press it
gently until it clicks.

To remove the battery pack:

1. Slide the OPEN button towards the

camcorder and open the LCD
panel.

2. Hold down the BATTERY RELEASE button and pull out the battery

from the ridge on its bottom part.

Charging the Battery Pack

1. Connect the power cord to the

adapter.

2. Plug the power cord into a power

outlet.

3. Open the front terminal cover and

connect the power adapter to the
camcorder’s DC IN terminal.

The charge indicator starts flashing. It
glows steadily when charging is complete.

To remove the power adapter:

1. Disconnect the power adapter

from the camcorder.

2. Unplug the power cord from the power outlet.

3. Disconnect the power cord from the adapter.

BATTERY
RELEASE button

DC IN terminal

Charge
indicator

Summary of Contents for opture S1













































































































































































































Search results

Summary of Contents for opture S1

Reviews:

Related manuals for opture S1

Brands by name

Popular brands

Canon opture S1, Instruction Manual

Search results

Summary of Contents for opture S1

Reviews:

Related manuals for opture S1

Brands by name

Popular brands