Canon opture S1 Instruction Manual Download

Page: 59 / 204

Adva

nced Functions

Ch
angin

g the

ing
s (1

)

CAMERA mode:

6. Fade in: Press the start/stop button in record pause

mode.
Fade out: Press the start/stop button in record
mode.

PLAY mode:

6. Fade in: Press the

button in playback pause

mode.
Fade out: Press the

button in playback mode.

Selecting an Effect

Available in the

, and

modes. When recording, set

the mode dial to a mode other than

1. Press the FUNC. button.

2. Select the digital effect symbol followed by

[

EFFECT].

• The symbol of the current setting is displayed.
• When recording to the memory card only the BLK & WHT

effect is available. Select it and proceed directly to Step 4
below.

3. Select the effect type.

The selected effect will be demonstrated on the current screen and will be shown in a
small animation to the right of the menu item.

4. Press the FUNC. button.

The symbol of the selected effect appears.

5. Press the D.EFFECTS button.

• The symbol turns green, and the effect is activated.
• From the playback pause mode, start playing the tape before

pressing the D.EFFECTS button.

• Pressing the D.EFFECTS button again deactivates the effect.

(

51)

D.EFFECT OFF

Summary of Contents for opture S1













































































































































































































Search results

Summary of Contents for opture S1

Reviews:

Related manuals for opture S1

Brands by name

Popular brands

Canon opture S1, Instruction Manual

Search results

Summary of Contents for opture S1

Reviews:

Related manuals for opture S1

Brands by name

Popular brands