28
When powered by a battery pack, the camcorder shuts off after 5 minutes
when the camcorder is left without any operation to save power (
67).
Approximately 30 seconds before the camcorder shuts off, “
AUTO
POWER OFF” appears in the center of the screen. If the camcorder shuts
off, turn the power switch to OFF and back on again.
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.
Screen Displays during Recording
Time Code
Indicates the recording time in hours,
minutes and seconds.
Remaining tape
Indicates the remaining time of the tape
in minutes. “
” moves during
recording. “
END” flashes when the
tape reaches the end.
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
Summary of Contents for opture S1
Page 198: ......
