Canon opture S1 Instruction Manual Download

Page: 38 / 204

Playing Back a Memory Card

1. Holding the lock button on the

power switch pressed down, set
the switch to PLAY.

2. Set the TAPE/CARD switch to

3. Press the +/– button to move

between images.
Press the

button to play back

a movie.

• The first scene appears as a still image

when playback is complete.

• Pressing the

button during

playback pauses the playback. Press the

button again to restart playback.

Pressing the

button displays the first

scene of the movie.

Images not recorded with this camcorder, uploaded from a computer (except
the sample images

61), edited on a computer and images whose file names

have been changed may not be played back correctly.

Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.

During movie playback: Press the +/– button on the camcorder (or the REW

button on the wireless controller) for 8x fast forward/fast rewind playback.

+/– button

(play/

pause)
button

Summary of Contents for opture S1













































































































































































































Search results

Summary of Contents for opture S1

Reviews:

Related manuals for opture S1

Brands by name

Popular brands

Canon opture S1, Instruction Manual

Search results

Summary of Contents for opture S1

Reviews:

Related manuals for opture S1

Brands by name

Popular brands