manualshive.com logo in svg

Canon MultiPASS L90, User Manual

Share
Download
Canon MultiPASS L90 User Manual Download Page 188

Canon

MultiPASS L90 Hardware User’s Guide

ENGLISH

10-16

Chapter 10

Frequently Asked Questions

Message

Error#

Meaning

Solutions

DOCUMENT TOO LONG

#003

The document is longer than 1 m.

Use a copy machine to make a reduced
copy of the document. Then send again.

ECM RX

–

The unit is receiving a fax using
ECM.

ECM transmissions may take longer than
normal transmissions. Try turning it off if
you need to receive quickly, or if you
know your local phone lines are in good
condition.

ECM TX

–

The unit is sending a fax using
ECM.

ECM transmissions may take longer than
normal transmissions. Try turning it off if
you need to transmit quickly, or if you
know your local phone lines are in good
condition.

FACE UP PRINT OUT

–

The paper delivery selector is set
to face-up delivery.

Proceed with manual feeding. For all
other operations, refer to page 7-8 to
select face-down delivery.

ERASING END

#995

The document was deleted from
the memory.

–

HANG UP PHONE

–

The optional handset or the
extension telephone is off the
hook.

Make sure the handset is set properly in
its cradle.

INSTALL CARTRIDGE

–

The toner cartridge is not installed.

Install the cartridge, making sure it is all
the way in. See page 2-20 for replacing
the toner cartridge.

MEMORY FULL

#037

The unit’s memory is full because
it has received too many
documents or a very detailed
document.

Print out any documents that are stored
in memory. Then start the operation
again.

If the memory contains any faxes you
don’t need, delete them.

You can not receive a fax in memory if
the fax was scanned with fine graphic
images.

–

The unit’s memory is full because
you tried to send too many pages
at once.

Divide the document and send each part
separately.

Turn Auto Halftone OFF. (

Q

p. 4-14)

Cancel printing from your computer and
try printing less pages at a time.

MEMORY FULL
PLEASE WAIT

–

The unit is sending a fax from
memory and its memory is full.

Wait until the fax is sent. The unit
continues to send the fax as memory
becomes available.

MEMORY IN USE  nn%

–

Shows the percentage of memory
currently in use.

If you need more space, print and check
the memory list, then clear any
unnecessary documents.

NO ANSWER

#005

The receiving fax machine does
not answer.

Make sure you dialled the correct
number. Try again later.

NO PAPER IN MAN TRAY

–

There is no print media in the
manual feed tray.

Insert the next sheet or envelope in the
manual feed tray. (

Q

p.7-11)

Summary of Contents for MultiPASS L90







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands