Canon MultiPASS L90, User Manual

Page: 130 / 230

Canon MultiPASS L90 Hardware User’s Guide ENGLISH
6-16 Chapter 6 Special Features
Sending a Stored Fax to Another Destination
Faxes stored in memory can easily be sent out again. If you get an error or busy
signal when sending a fax from memory, for example, you can send it to another
destination without having to scan it again. Also, faxes the unit receives into
memory can be sent to another location.
1. Press FUNCTION, then MEMORY REFERENCE.
FUNCTION
MEMORY
REFERENCE
MEMORY REFERENCE
1.DELETE DOCUMENT
2. Use the search buttons to select 5.MEMORY TX.
MEMORY REFERENCE
5.MEMORY TX
3. Press SET, then use the search buttons to select the TX/RX number of the
fax you want to resend.
SET
MEMORY TX
TX/RX NO.
0002
Use the cursor buttons (
k
,
j
) to display the SET TIME and the other party’s
number for the TX/RX number displayed. For more information, print the Doc.
Memory List as described in “Printing a List of the Documents in Memory”
(
Q
p. 6-14).
4. Press SET, then enter the destination(s) you want to send the fax to. You can
do this by:
J
Pressing one-touch speed dialling buttons (with the FUNCTION lamp
off).
J
Pressing CODED DIAL and entering coded speed dialling codes. (Be
sure to press CODED DIAL between each code.)
J
Using the numeric buttons to enter one destination only. (Be sure to press
SET after entering the number.)
5. Press SET twice.
SET SET