Canon MK3000 User Manual Download Page 37

Page: 37 / 203

Close the cover.

Turn on the printer.

(P.15)

Check the control settings of the tube warmer.

The current control settings of the warmer will
be shown on the display.

For information on how to control settings of
the warmer, refer to

"Changing the Control

Setting of the Tube Warmer (P.34)"

IMPORTANT

• When the tube warmer is not set, the tube warmer control settings are disabled.

• If you cannot print correctly even with the tube warmer (for example, printing is blurred), change the

temperature setting of the tube warmer.

(P.35)

NOTE

• When "Label" or "Wrap Around" is selected for the print media in the print settings, and "ON" is

selected, "OFF" will appear on the display. To change the print media, press the [Print] key.

(P.72)

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands