Canon MK3000 User Manual Download Page 186

Page: 186 / 203

182

Message

Details/Solution

Replace print media.

Load a new print media and press the [Enter] key to resume
printing.

(P.21)

End of ribbon.

Replace ribbon cassette.

Replace the ribbon cassette with a new one and press the
[Enter] key to resume printing from the interrupted page.

Print head position can’t be
initialized.

Press any key. If the same message appears again, contact
your place of purchase.

Print head can’t be moved to
print position.

Cut position can’t be
initialized.

Size switch lever is not
positioned correctly.
Proceed?

The size of the print media set on the printing preference
display does not match the position of the size switch lever.

(P.22)

If you select "Yes," printing will start.
To reset the settings, select "No" and follow the instructions
on the screen to set the size switch lever to the correct
position. Press any key to start printing.

Data check.

Resetting completely

An error has occurred in the data and all settings have
reverted to the settings at the time of purchase. All saved
fi les have also been deleted.

Power turned off when
saving fi le.

Checking saved data.

Check the saved fi les. If the data is not saved, re-save it.

Power turned off when
loading fi le.

Resetting input data.

The data being entered will be deleted. Re-enter the data.

Power turned off when
deleting fi le.

Checking saved data.

Check the saved fi les. If the fi le has not been deleted, delete
it.

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands