Canon MK3000 User Manual Download Page 42

Page: 42 / 203

Use [ ] or [ ] to select "Page Display" and press the [Enter] key.

Page Display screen will appear on the display.

Press the [Shift]+[Cancel] keys to return to the
character input display.

Init. DeleteCheck

Page Display

Counter

O t h e r s

Page Display
Page 41 of 53
Memory used

Press the [Shift]+[Cancel] keys.

■

How to Use the Cursor

The mark that indicates the position for entering text is called the "cursor."
Use the arrow keys ([ ], [ ], [ ], [ ]) to move the cursor when using this device. The key
operations for moving the cursor are as follows.

Key press

Cursor movement

[ ]

Move to right one character or to the next page.

[ ]

Move to left one character or to the previous page.

[ ]

Go to the line above.

[ ]

Go to the line below.

[Shift]+ [ ]

Go to the top of the page.

[Shift]+ [ ]

Go to the end of the page.

[Shift]+ [ ]

Go to the top of the previous page.

[Shift]+ [ ]

Go to the top of the next page.

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands