Canon MK3000 User Manual Download Page 64

Page: 64 / 203

Creating and Editing Pages

Creating a New Page

To create a new page, press the [Enter] key. (Page Break)

[Example] Create a new page after the currently displayed page.

200V

(Page 1)

(Page 2)

Move the cursor to the end of the line.

9˛

Press the [Enter] key.

A page break will be performed and a new page
will be created.

You can check the page number of the currently
displayed page on the display. Also, arrows ( /

) before and after the page number indicate

that there is a page before or after the currently
displayed page.

NOTE

• The format setting of the new page will be the same as the previous page. For more information

about format setting, refer to

"About Format Settings (P.42)"

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands