Canon MK3000 User Manual Download Page 180

Page: 180 / 203

176

(Continued from previous
page)

The device does not print
clearly.

The printing is
misaligned.

The printing is missing or
blurred.

Is the operating environment
appropriate?

For information concerning the
operating environment, refer to

"Specifi cations (P.189)"

If you use a tube warmer
(optional), you can print at
external temperatures as low as
5°C (41°F).

If the problem is not solved by
using the tube warmer

Set the temperature of the tube
warmer to "High."

(P.35)

The parts of the tube that do
not pass through the tube
warmer (such as the top
portion of the tube) will not be
warmed up. Check the printout
on a warmed area.

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands