Canon MK3000 User Manual Download Page 44

Page: 44 / 203

Entering Symbols

You can use the input symbol function to enter symbols that cannot be entered using the
keyboard.

[Example] Input "Ω."

Press the [Symbol] key.

Use the arrow keys ([ ], [ ], [ ], [ ]) to select "Ω" from the list of symbols.

The symbol screen is divided into two groups. To
switch between groups, press [Shift] + [ ] (or
[ ]).

For symbols that can be entered, see

"List of

Symbols (P.196)"

ɻ˛

Press the [Enter] key.

"Ω" will be displayed at the position indicated by

If you want to delete the character displayed at
the position indicated by

press the [Back Space] key while holding down
[Shift].

ɻЌ˛

Press the [Shift] + [Enter] keys.

"Ω" will be entered.

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands