Canon MG6600 Series, Online Manual

Page: 769 / 960

2. Click Advanced settings .
If the User Account Control screen is displayed, click Yes .
3. Select and right-click Inbound Rules , then select New Rule .
If you set outbound rules, right-click Outbound Rules .
4. Select Port , then click Next .
5. Select TCP , then select Specific local ports: and input "137", then click Next .
If you open UDP ports, select UDP .
If you open other ports, input the other port's number in Specific local ports: .
6. Select Allow the connection , then click Next .
7. Choose the profile for which this rule applies, then click Next .
8. Input any name and description, then click Finish .
9. Repeat steps 3 to 8 to open the other ports (138TCP, 138UDP, 139TCP, and 139UDP).
10. Confirm that the port names are added on the Inbound Rules screen, then close Windows
Firewall .
◦ If you are using Windows Vista or Windows XP:
1. Select items from the Start menu as shown below.
■ In Windows Vista, click Start > Control Panel > Security > Windows Firewall > Change
settings .
■ In Windows XP, click Start > Control Panel > Security Center > Windows Firewall .
2. Click the Exceptions tab, and click Add port .
3. On the Add a Port screen, input the following information, and click OK .
Name : Input any name for the port.
Port number : Input "137".
Protocol : Select TCP .
4. Repeat steps 2 and 3.
On the Add a Port screen, input the same information as you did in step 3 except for selecting
UDP in Protocol .
5. Repeat steps 2 to 4 to open the other ports (138TCP, 138UDP, 139TCP, and 139UDP).
6. Confirm that the port names are added on the Exceptions sheet, and click OK .
Check5
Change the workgroup name to "WORKGROUP" following the procedure
below.
Note
• Changing the workgroup name may have an effect on the network, so you need to ask the administrator to
change it.
1. Display the System properties screen as shown below.
• In Windows 8.1 or Windows 8, select the Explorer icon in Taskbar on Desktop , right-click Computer
from the list on the left, select Properties , then click Change settings .
• In Windows 7 or Windows Vista, right-click Computer , select Properties , then click Change settings .
• In Windows XP, right-click My Computer , then select Properties .
769