Setting Preferences and Scanning with ScanGear MF
3-29
S
c
ann
ing
3
■
[Fading Correction]
The fading correction feature rebuilds the color quality that has faded over time. It
also increases saturation of dull-colored originals to reproduce a vivid image. The
default setting is [OFF].
NOTE
•
This setting is not available when [Canon ColorGear] is selected in the [Color Settings]
tab in the [Preferences] dialog box.
•
This setting is reflected also in the preview image.
•
This setting is available when [Color] is selected in [Color Mode].
•
You cannot apply this setting when the preview image is not displayed.
•
If you set [Fading Correction] to [Low], [Medium], or [High], scanning may take more time.
•
The fading correction may not work when the scanning area is too small.
■
[Grain Correction]
The grain correction feature smoothes out the film grain of the image recorded on
fast film. The result is smoother tones and higher overall quality. The default setting
is [OFF].
NOTE
•
This setting is not reflected in the preview image.
•
This setting is available when [Color] or [Grayscale] is selected in [Color Mode].
•
If you set [Grain Correction] to [Low], [Medium], or [High], scanning may take more time.
•
The grain correction may not work when the scanning area is too small.
[OFF]
No fading correction will be made.
[Low]
Corrects slightly faded images.
[Medium]
Normally this setting is recommended.
[High]
Corrects highly faded images, but it may change the tone of the
image.
[OFF]
No grain correction will be made.
[Low]
Select this setting when the grain in the picture is not so notable.
[Medium]
Normally this setting is recommended.
[High]
Smoothes out the grain in the picture even when the grain is very
notable but it may lower the image sharpness and tonal quality.
