1abb
There is a mismatch between the data that
has been written in EEPROM and the data
that has been read. (a: chip No. 0 through
5; bb: chip faulty address)
- Initialize the RAM.
- Replace the EEPROM.
- Replace the DC controller PCB.
2abb
The ID in EEPROM that has been read and
the ID in ROM are compared. An error
will be identified if they do not match. (a:
chip No. 0 through 5; bb: chip faulty
address)
3abb
When the main power is turned on, the ID
in EEPROM and the ID in ROM are
compared. An error will be identified if
they do not match. (a: chip No. 0 through
5; bb: chip faulty address)
- Check the position and condition of the
EEPROM.
- Initialize the RAM.
- Replace the EEPROM.
- Replace the DC controller PCB.
E202
There is a scanner HP error.
0001
An error has occurred when the sensor was
moved to home position.
The scanner HP sensor is faulty; the
scanner motor is faulty; the reader
controller PCB is faulty.
- Check the connector for any fault in
connection.
- Replace the scanner HP sensor.
- Replace the scanner motor.
- Replace the reader controller PCB.
0002
An error has occurred when the sensor was
moved from home position.
The scanner HP sensor is faulty; the
scanner motor is faulty; the reader
controller PCB is faulty.
E225
The intensity of light is inadequate.
0001
At time of shading, the intensity if below a
specific level.
- Check the connector for any fault in
connection.
- Replace the scanning lamp.
- Replace the inverter PCB.
- Replace the reader controller PCB.
0002
ADFThe intensity is below a specific level
between sheets (ADF).
E227
there is an error in the power supply (24 V).
0001
At power-on, the 24-V port is OFF.
- Check the connector for any fault in
connection.
- Replace the power supply.
0002
At the start of a job, the 24-V port is OFF.
0003
At the end of a job, the 24-V port is off.
0004
When a load is driven, the 24-V port is
OFF.
E240
The communication between the main controller PCB and the DC controller PCB is
faulty.
Code
Description
Remedy
Summary of Contents for iR6570 series
