Canon iR6570 series, Portable Manual

Page: 202 / 320

T-5-41
COPIER > FUNCTION > PART-CHK
Sub-item Description Level
CL Use it to select a clutch whose operation you want to check.
(range: 1 to 5)
Procedure
1) Select the item.
2) Using the keypad, type in the code of the clutch.
3) Press the OK key.
4) Press [CL-on] to check the operation.
1
CL-ON Use it to start a check on the clutch.
Procedure
1) Select an item, and press the OK key so that the clutch will
repeatedly go on and off as follows: for 0.5 sec, on -> for 10 sec,
off -> for 0.5 sec, on -> for 10 sec, off -> for 0.5 sec, on -> off.
1
MTR Use it to select the motor whose operation you want to check.
(range: 1 to 30)
Procedure
1) Select the item, and press the OK key so that the motor will
repeatedly go on and off as follows: for 0.5 sec, on -> for 10 sec,
off -> for 0.5 sec, on -> for 10 sec, off -> for 0.5 sec, on -> off.
1
MTR-ON Use it to start the operation of the motor.
Procedure
1) Select the item, and press the OK key so that the motor will
repeatedly go on and off as follows:
- for 20 sec on -> off
- the hopper stirring motor and horizontal registration motor: for
10 sec, on -> off
- shift tray motor: stops at front/rear HP
Be sure to remove the toner bottle before checking the operation
of the bottle motor (MTR=22); otherwise, the toner is likely to
spill out inside the machine.
1
SL Use it to select the solenoid whose operation you wan to check.
(range: 1 to 11)
Procedure
1) Select the item.
2) Type in the code of the solenoid using the keypad.
3) Press the OK key.
4) Press [SL-on] to check the operation.
1