Canon iR6570 series, Portable Manual

Page: 110 / 320

*5
02
A file system error has
occurred.
1. Type in CHK-TYPE corresponding to the partition in
question, and execute HD-CLEAR; then, turn off and
then back on the power.
2. Replace the HDD, and re-install the system software.
*6
The machine does not permit execution of HD-CLEAR
in service mode (to prevent loss of partition information
such as address book and filter data).
1. Ask the user to download the address book data using
a remote UI.
2. Start download mode from service mode; then,
execute full formatting using
the SST, and re-install the system software. Thereafter,
turn off and then back on the power.
*7
1. Execute HD-CLEAR by setting "1', '2', '3', and '5' to
CHK-TYPE; then, turn off and then back on the power.
2. Replace the HDD, and re-install the system software.
*8
Recovery operation for the Boot partition necessarily
requires the use of the SST in safe mode.
1. Start in safe mode, and execute full formatting in the
SST, and re-install the system software. Thereafter, turn
off and then on the power.
2. Replace the HDD, and re-install the system software.
*9 03
There is poor contact
for the HDD, or there
is a system error.
1. Check the cables and power cord for disconnection.
2. Start up in safe mode; then, execute full formatting
using the SST, and re-install the system software.
Thereafter, turn off and then back on the power.
3. Replace the HDD, and re-install the system software.
*10
11
21
There is poor
connection of the
HDD.
1. Check the cable and the power connectors for
disconnection.
2. Replace the HDD, and re-install the system software.
*11
13
25
A write operation has
been suspended.
File data as of Box on the HDD may be damaged.
1. Set '0' for CHK-TYPE, and execute HD-CHECK;
then, turn off and then back on the power.
2. Set '1' for CHK-TYPE, and execute HD-CLEAR.
(In the case of APL_SEND or BOOTDEV, reformat
using the SST and re-install the system software.)
3. Replace the HDD, and re-install the system software.
YY Description Remedy