Canon iR6570 series, Portable Manual

Page: 71 / 320

Chapter 2
2-37
F-2-54
b. If the fixing web has been used at all,
Before removing the solenoid, check the position of
the drive lever as found when the solenoid goes on.
After replacing the solenoid, turn the screw [2] so
that the drive lever [1] is located as it was before the
replacement.
F-2-55
2.6.4 After Replacing the
Fixing Web
0009-4955
iR5570 / iR6570
- If you have replaced the fixing web, be sure to reset
the counter reading to '0' using the following
service mode items:
COPIER>COUNTER>MISC>FIX-WEB
COPIER>COUNTER>DRBL-1>FIX-WEB
2.6.5
Adjusting the
Position of he Fixing
Inlet Guide Solenoid
(SL1)
0007-8757
iR5570 / iR6570
Turn the screw [1] to adjust the position of the
solenoid so that the guide will be as shown in the
figure when the solenoid goes on.
F-2-56
2.6.6 Adjusting the
Position of the Fixing
Inlet Guide
0007-7297
iR5570 / iR6570
- Adjust the position of the solenoid using the two
screws [1] so that the fixing inlet guide will be
positioned as indicated when the solenoid turns on.
F-2-57
<Points to Note When Making Adjustments in th
Field>
8.6mm
[1]
[2]
A
[1]
[2]
1.6mm
Fixing roller
Pressure roller
Solenoid
Inlet guide
11.1mm 12.7mm
[1]
1.6mm
Fixing roller
Pressure roller
Solenoid
Inlet guide
11.1mm 12.7mm
[1]