Canon iR6570 series, Portable Manual

Page: 212 / 320

SL-CHK Use it to check the ADF solenoid on its own.
Procedure
1) Press SL-CHK to highlight.
2) Type in the solenoid number using the keypad.
3) Press the OK key.
4) Press SL-on to check the operation.
Solenoid Number
0: locking solenoid
1: stamp solenoid
1
SL-ON Use it to start the operation of the solenoid.
Procedure
1) Press SL to highlight and then the OK key to start the
operation of the motor.
2) Press the OK key once again to stop the operation.
(The operation will stop automatically in about 5 sec; however,
the indication will not be 'STOP' unless the OK key is pressed
once again.)
1
MTR-ON Use it to start the operation of the motor.
Procedure
1) Press MTR-on to highlight and then the OK key to start the
operation of the motor.
2) Press the OK key once again to stop the operation.
(The operation will stop automatically in about 5 sec; however,
the indication will not be 'STOP' unless the OK key is pressed.)
1
ROLL-CLN ADF Roller Cleaning Mode
Execute the mode so that the motor will rotate the roller. Force
lint-free paper moistened with alcohol against the roller to clean
it.
Procedure
1) Press ROLL-CLN to highlight.
2) While the roller is rotating, force lint-free paper moistened
with alcohol against the roller to clean.
3) Select ROLL-CLN to highlight and press the OK key so that
the roller will stop.
1
FEED-ON Use it to check the movement of paper in the ADF on its own.
Procedure
1) Press FEED-on and then the OK key so that paper movement
will start according to the operation mode selected using FEED-
CHK.
1
COPIER > FEEDER > FUNCTION
Sub-item Description Level