Canon iR1020 Series, Service Manual

Page: 238 / 304

Chapter 16
16-8
#ACC
Item Initial setting Range of setting Function
CARD 0 0 - 99999 Card reader installation setting
CC-SPSW 0 0 or 1 Control card I/F support setting
COIN 0 0 or 1 Coin vendor change setting
CONTROL 0 0 or 1 Pinter output control setting at the time of support of control card I/F
#COUNTER
Item Function
TOTAL total counter
PICK_UP pickup-related counter
FEEDER feeder counter
JAM jam-related counter
MISC other counter
DRBL-1 durables counter
#LMS Not used.
#E-RDS
Item Default Setting Range Description
E-RDS SWITCH 0 0 / 1 Operation mode setting
0 (OFF): Does not operate e-RDS.
1 (ON): Operates e-RDS.
RGW-ADDRESS URL of UGW Character string length: 129
bytes(including NULL, one-byte codes
only) URL of UGW
RGW-PORT 443 1 to 65535 UGW port No.
COM-TEST Execution of communication test
COM-LOG Details of communication test result
#REPORT
Setting Function
#REPORT SW Not used
#REPORT OUTPUT SERVICE DATA LIST Output of service data list
SYSTEM DATA LIST Output of system data list
SYSTEM DUMP LIST Output of system dump list
COUNTER LIST Output of counter list
ERROR LOG LIST Output of error log list
SPEC LIST Output of spec list
SERVICE LABEL Output of service label
ERDS COM LOG LIST Output of communication error log information related to e-RDS
#REPORT NUMERIC Not used
#DOWNLOAD Download mode
#CLEAR
Item Level2 Function
TEL & USER DATA Use it to clear all areas under user registration/setting.
SERVICE DATA Use it to clear the counters (numerator), date, and start
data form the system dump list.
COUNTER Use it to clear the maintenance/parts counter data and each mode counter data.
SOFT-CNT Not used.
TYPE Use it to clear the user data and the service data by specified settings.