manualshive.com logo in svg

Canon iR1020 Series, Service Manual

Share
Download
Canon iR1020 Series Service Manual Download Page 145

Chapter 9

9-7

F-9-12

9.4.1.1.9 Detaching the Front Cover

0013-2409

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF

1) Remove the cassette.
2) Using a flathead screwdriver, release the two claws [1] at the right and

four hooks [2] at the top.

3) By releasing the two bosses [3] at the bottom, detach the inner cover [4].

F-9-13

9.4.1.1.10 Detaching the Inner Cover

0013-7317

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF

1) Detach the toner supply bottle.
2) Remove the two screws [1].
3) Release the two claws [2], and the remove the inner cover [3].

F-9-14

9.4.1.1.11 Detaching the Delivery Tray Front Cover

0013-7319

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF

1) Detach the reader left cover, the front-left cover, and the inner cover.
2) Remove the screw [1], and then detach the delivery tray front cover [2].  

F-9-15

9.4.1.1.12 Detaching the Delivery Tray

0013-2411

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF

1) Remove the reader left cover and the front-left cover. 
2) Remove the rear cover, the reader rear cover, the right cover, the reader

right cover, the inner cover and the delivery tray front cover. 

3) Detach the operation panel.
4) Detach the delivery tray [1] from the front.

F-9-16

9.4.2 Drive Unit

9.4.2.1 Removing the Main Drive Unit

0013-3169

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF

[3]

[4]

[2]

[1]

[3]

[4]

[1]

[2]

[2]

[3]

[1]

[2]

[1]

[1]

Summary of Contents for iR1020 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands