Canon iR1020 Series, Service Manual

Page: 176 / 304

Chapter 11
11-2
(As for deletion of certificate, see 'CA certificate'.)
11.1.7 SOAP Communication Function
0015-4386
iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F / iR1024i / iR1024iF
Following processings are enabled by use of SOAP communication (SSL client communication).
Server authentication is performed by use of CA*1 certificate issued by VeriSign.
In case the server certificate or CA certificate is expired, the device is not connected to UGW.
*1: CA stands for Certificate Authority, which are the institutions which issue electronic certificate used in e-commerce etc.
(1) Communication Test
- Perform the communication test
(2) Transmit all or a part of the following data based on the schedule information obtained from UGW.
- Counter details data
- Service mode counter
- Parts counter
- Mode counter
- ROM version
- Schedule information
- Application debug log
(3) In case of detecting jam, or alert/service call error from the device, transmit the following to UGW.
- Transmission of alert code (transmit the counter information simultaneously)
Transmit an alert code in case of a change in the status of the device.
Main alert codes are toner LOW/OUT, jam, and door open.
At error recovery, transmit again the data that indicates the recovery.
- Transmission of jam log (transmit the counter information simultaneously)
- Transmission of service call (Error code) log (transmit the counter information simultaneously)
(4) Change of device schedule information
- Check whether there is a processing to execute.
- Update the schedule information.
- Return the result of the operation.
(5) Filtering reception from UGW
- Alert filtering
T-11-1
Transmission Detail List:
Transmission Detail / Process Detail Transmission Timing Remarks
Communication test
communicatonTest Either at the time of execution of the service mode
of the device or upon a request from UGW with
'getOperationList'
Counter details data collection/transmission
postGlobalClickCount Once every 16 hours. The detailed counter data for each paper size
such as Total.
Service mode counter collection/transmission
postSeviceModeCounter Once every 16 hours. The counter data tied to the service mode
number. Mainly used for billing.
Mode counter collection/transmission
postModeCounter Once every 16 hours. The counter data by operation mode.
Parts counter collection/transmission
postPartsCounter Once every 16 hours. The counter data indicating the amount of
usage by part.
ROM version
postFirmwareInfo Once every 7 days.
Schedule information transmission
postConfiguration Once every 16 hours.
Debug log
postDebugLog At the time that the log has been accumulated
5kbyte The log data output by an application for
analyzing a malfunction.
Alert code
postAlert At the time of change in the device condition The data when a status change occurs.
Jam log
postJamLog At the time of jam occurrence Includes the jam code, date of occurrence,
total counter at occurrence, paper feeding slot,
and paper size.
Service call log
postServiceCallLog At the time of service call occurrence Includes the error code, error subcode, date of
occurrence, total counter at occurrence, paper
feeding slot, and paper size.
Operation list check
getOperationList Once every 16 hours.
Upon a request from UGW