Canon iR1020 Series, Service Manual

Page: 115 / 304

Chapter 7
7-9
3) With the flathead screwdriver inserted as shown below, remove the man-
ual pickup pad [1].
F-7-17
7.6.8 Registration Roller
7.6.8.1 Removing the Registration Roller
0013-1235
iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Remove the control panel.
2) Remove the developing unit.
3) Remove the registration clutch.
4) Remove the two shafts [1], and then remove the transfer guide [2].
F-7-18
5) Release the two hooks [1], and then detach the registration sensor cover
[2].
F-7-19
6) Remove the two bosses [1], disconnect the connector [2], and then slide
the registration sensor unit [3] toward you to remove it.
F-7-20
7) Make a note of the positions ([A] to [C]) of two springs [1]. Next, remove
the two springs [1].
F-7-21
[1]
[1]
[1]
[2]
[1]
[2]
[2] [3]
[1]
[1]
[2]