Canon iR C2880 series, Service Manual

Page: 187 / 610

Chapter 5
5-23
F-5-62
5.4.7 Contact Sensor HP Sensor
5.4.7.1 Before Removing the Contact Sensor HP Sensor
0014-1386
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the copyboard glass. (page 5-17) [Removing the Copyboard
Glass]
2) Detach the ADF Reading Glass. (page 5-17) [Removing the ADF
Reading Glass]
5.4.7.2 Removing the Contract Sensor Home Position
Sensor
0014-1388
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Pull the drive belt [1] in the direction of the arrow so that the contact image
sensor (CIS) [2] is where indicated in the figure.
F-5-63
2) Remove the CIS home position sensor [3].
-connector [1]
When detaching the sensor, do so as if to push it under the claw [2] found at
the rear.
F-5-64
After replacing the sensor, pull the drive belt (rear) [1] in the direction of the
arrow so that the contact image sensor (CIS) [2] is returned to the
F-5-65
5.4.8 Original Sensor
5.4.8.1 Before Removing the Original Size Sensor (AB/
Inchconfiguration)
0014-1390
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the copyboard glass. (page 5-17) [Removing the Copyboard
Glass]
2) Detach the reader rear cover. (page 10-16) [Detaching the Reader Rear
Cover]
5.4.8.2 Removing the Original Size Sensor (AB/Inch-
configuration)
0014-1393
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the cover.
F-5-66
2) Disconnect the connector [1], and detach the flexible cable [2].
F-5-67
3) Detach the cover [2].
-8 screws [2]