4
4
4-23
4-23
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the STP Move Motor/Gripper Unit Move Motor
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the STP Move Motor/Gripper Unit Move Motor
6) Remove the additional tray harness (only when the additional tray is installed).
7) Remove the tray.
F-4-63
F-4-63
8) Move the gripper unit in the direction of the arrow.
F-4-64
F-4-64
9) Remove three screws and then the grate-shaped guide (lower).
x3
F-4-65
F-4-65
10) Remove two wire saddles.
11) Disconnect the relay connector and one screw.
x1
x1
x2
F-4-66
F-4-66
Summary of Contents for Inner Finisher Additional Tray-A1
