4
4
4-14
4-14
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Paper Lever Drive Solenoid
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Paper Lever Drive Solenoid
9) Remove three screws and then the grate-shaped guide (lower).
x3
F-4-32
F-4-32
10) Remove two wire saddles.
11) Disconnect the relay connector and one screw.
x1
x1
x2
F-4-33
F-4-33
12) Remove three screws and then the processing tray.
x3
F-4-34
F-4-34
13) Remove the harness from the harness guide.
14) Remove one screw and then the paper lever unit.
15) Remove two screws and then the paper lever drive solenoid.
x1
x2
x1
F-4-35
F-4-35
Summary of Contents for Inner Finisher Additional Tray-A1
