4
4
4-26
4-26
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Additional Tray Lift Motor
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Additional Tray Lift Motor
Removing the Additional Tray Lift Motor
1) Remove the additional tray.
2) Remove two screws and then the top cover of the tray.
3) Disconnect one connector.
x2
x1
F-4-74
F-4-74
4) Turn over the tray.
5) Remove two screws and then the bottom cover of the tray.
x2
F-4-75
F-4-75
6) Remove four screws, one earth cable, one washer, and one plate.
x4
F-4-76
F-4-76
7) Remove one screw and then the harness guide.
x1
F-4-77
F-4-77
Summary of Contents for Inner Finisher Additional Tray-A1
