4
4
4-20
4-20
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Shift Motor
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Shift Motor
3) Disconnect one flexible cable and eight connectors.
4) Remove one wire saddle.
5) Remove two screws, and then pull out the finisher controller PCB along with the mount.
x2
x9
x1
F-4-52
F-4-52
6) Remove four wire saddles and the harness from the harness guide, and then pull out the finisher
controller PCB along with the mount.
x4
F-4-53
F-4-53
7) Disconnect eight connectors.
x8
F-4-54
F-4-54
8) Disconnect the relay connector of the shift motor cale.
9) Disconnect the relay connector.
10) Remove one wire saddle and then the harness leading to the upper guide from the harness guide.
x1
x1
F-4-55
F-4-55
Summary of Contents for Inner Finisher Additional Tray-A1
