4
4
4-28
4-28
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Tray Lift Motor
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Tray Lift Motor
4) Remove two screws and then the top cover of the tray.
5) Disconnect one connector.
x1
x2
F-4-81
F-4-81
6) Turn over the tray.
7) Remove two screws and then the bottom cover of the tray.
x2
F-4-82
F-4-82
8) Remove three screws, one earth cable, one washer, one spring, and one plate.
x3
F-4-83
F-4-83
9) Remove one screw and then the harness guide.
x1
F-4-84
F-4-84
Summary of Contents for Inner Finisher Additional Tray-A1
