4
4
4-35
4-35
Parts Replacement and Cleaning Procedure > Removing the PCB > Removing the Finisher Controller PCB
Parts Replacement and Cleaning Procedure > Removing the PCB > Removing the Finisher Controller PCB
Removing the Finisher Controller PCB
1) Remove three screws and then the inner cover.
x3
F-4-100
F-4-100
2) Remove the additional tray PCB along with the mount (only when the additional tray is
installed).
x1
F-4-101
F-4-101
3) Disconnect one flexible cable and eight connectors.
4) Remove one wire saddle.
5) Remove two screws, and then pull out the finisher controller PCB along with the mount.
x2
x9
x1
F-4-102
F-4-102
6) Remove four wire saddles and the harness from the harness guide, and then pull out the
finisher controller PCB along with the mount.
x4
F-4-103
F-4-103
Summary of Contents for Inner Finisher Additional Tray-A1
