4
4
4-16
4-16
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Staple Solenoid
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Staple Solenoid
9) Remove three screws and then the grate-shaped guide (lower).
x3
F-4-40
F-4-40
10) Remove two wire saddles.
11) Disconnect the relay connector and one screw.
x1
x1
x2
F-4-41
F-4-41
12) Remove three screws and then the processing tray.
x3
F-4-42
F-4-42
13) Remove the harness from the harness guide.
14) Remove one screw and then the paper lever unit.
x1
x1
F-4-43
F-4-43
Summary of Contents for Inner Finisher Additional Tray-A1
