Canon Inner Finisher Additional Tray-A1, Service Manual

Page: 18 / 84

2
2
2-5
2-5
Technology > Servicing Work > Version Upgrade
Technology > Servicing Work > Version Upgrade
Servicing Work
Scheduled Servicing
When the endurance time of a part expires soon, replace and/or clean it as required.
Item Part name Expected
service life
Qty Operation remarks Reference
Periodically
replaced
parts none
Consumale
parts Stapler 500,000 sheets 1 Replacement p. 4-8
Offset Roller 1,000,000
sheets
2 Replacement p. 4-9
Shutter unit 1,000,000
sheets
1 Replacement Static eliminator
at the exit part
p. 4-10
Paper
retainer(Front)
1,000,000
sheets
1 Replacement Static eliminator
at the entrance
p. 4-11
Paper
retainer(Rear)
1,000,000
sheets
1 Replacement Static eliminator
at the entrance
p. 4-11
Periodically
serviced
parts none
T-2-1 T-2-1
Customer maintenance
Cleaning the offset roller
Details
Offset roller should e cleaned once a month to maintain the accuracy of the stacking
alignment as foreign articles like dust are likely to stick to the roller.
[1]
Instruction
1) With holding up the roller a little, rub off paper dusts, etc. by a moist cloth.
MEMO:
If the optional tray is installed, it is easier to clean the rollers just after delivering a paper
onto the optional tray since the optional tray gets descended lower than the rollers.
Version Upgrade
Upgrade the firmware of the finisher controller according to the upgrade procedure
descried in the service manual of the host machine.
This finisher does not support upgrading via downloader PCB (FY9-2034).
■
•
•
F-2-8 F-2-8