Canon IMAGERUNNER 7086, Service Manual

Page: 535 / 615

Chapter 17
17-73
<CST>
T-17-50
AFN-
PSWD Use it to set restrictions on access in user mode.
2
settings
0: off (shift to user mode scan without requiring password; default)
1: on (shift to user mode scan after password match)
PTJAM-
RC Use it to set the PDL jam recovery switch.
2
settings
0: off (do not execute recovery); 1: on (execute recovery; default)
SLP-
SLCT Use it to set the switch designed to switch between existing network-based applications.
2
settings
0: do not use (default); 1: use
When it is set to '1', a shift to sleep mode 3 (1w sleep) will not occur.
PS-
MODE Use it to make PS compatible settings.
2
settings
0: no compatibility (default)
1: PS type 3 Halftone command compatible (dither growth reversed); 2 to 65535: for future
expansion
CNCT-
RLZ Use it to enable/disable the connection serialization function.
2
settings
0: off; 1: on
DOM-
ADD Use it to set the transmission target domain input complementary switch for mail transmission.
2
Use it to enable/disable combination of the address entered for transmission with a domain
(e.g., @xxx.co.jp) set in user mode.
settings
0: do not combine (default); 1: combine
<when sending mail to aaaa@xxxx.co.jp>
1) Set 'xxxx.co.jp' in the domain in user mode; then, set '1' for the item.
2) At time of transmission, type 'aaaa' so that the address will read 'aaaa@xxxx.co.jp'.
COPIER > OPTION > CST
Sub item Description
Sub
item
P-SZ-C1/
C2 Use it to select the size of the paper used in the front deck (C1: right deck; C2: left deck).
1
settings
6: A4 (default); 15: B5; 18: LTR
U1-
NAME
to U4-
NAME Use it to enable/disable indication of the paper name when paper of a particular size group (U1
through U4) is detected.
2
settings
0: indicate 'U1, U2, U3, U4' on touch panel (default)
1: indicate paper name set in service mode (CST-UI, U2, USE, U4)
CST-U1 Use it to specify the name of paper used in a paper size group (U1).
2
When any of the following special size papers is set for U1, the paper may be used as a special
size paper for U1 (universal cassette).
settings
22: K-LGL; 31: Government LETTER (default)
CST-U2 Use it to specify the name of paper used in a paper size group (U2).
2
When any of the following special size papers is set for U2, the paper may be used as a special
size paper for U2 (universal cassette).
settings
24: Foolscap (default); 26: Officio; 27: Ecuadorian Officio; 33: Argentine Legal; 36:
Argentina Officio; 37: Mexican Officio
COPIER > OPTION > USER
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level