manualshive.com logo in svg

Canon IMAGERUNNER 7086, Service Manual

Share
Download
Canon IMAGERUNNER 7086 Service Manual Download Page 40

Chapter 1

1-19

1.2.4.3 Handling of the Laser Assembly

0010-7424

Take full care when servicing the area around the laser scanner system, as by avoiding bringing a reflective
tool (e.g., screwdriver) into the laser path and removing watches and rings before starting the work. (These
items are likely to reflect the laser light, and exposure to laser light can permanently damage the eye.)
The machine uses red laser light, and its covers that possibly reflect the light are identified by an appro-
priate label. Be sure to take extra care if you must service the area behind any of these covers.

A cover used to block laser light is identified by the following label:

F-1-13

1.2.4.4 Safety of Toner

0010-7425

The machine's toner is a non-toxic material consisting of plastic, iron, and small amounts of dye.
If your skin or clothes have come into contact with toner, use paper tissue to remove as much toner as pos-
sible, and then wash with water. Do no use warm or hot water, which will cause the toner to turn jelly-like
and fuse permanently with the fibers of clothes. Also, do not bring toner into contact with vinyl, which it
will readily react.

Do not throw toner into fire. It can explode.

Summary of Contents for IMAGERUNNER 7086








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands