Canon IMAGERUNNER 7086, Service Manual

Page: 354 / 615

Chapter 12
12-3
12.1.8 e-RDS setting screen
0011-6838
The e-RDS setting screen is in the service mode screen.
When the tab above is selected on any e-RDS setting screen, it changes to the mid item screen. Moreover,
it returns to previous screen when reset key is pressed.
Menu Screen
F-12-1
Setting screen of e-RDS. The form and the initial value of each setting item are as follows.
Item(meaning) Explanation
E-RDS
(Embedded-RDS) Turning OFF/ON e-RDS. 0:OFF / 1:ON
Counter information and error information are transmitted to the host at ON.
Initial value: 0: OFF
RGW-ADR
(RDS-Gateway ADDRESS) URL of the host (When the input area is selected (touched), shift to the
keyboard screen)
Initial value: URL of an actual host.
Length: 129 characters (NULL is contained)
RGW-PORT
(RDS-Gateway PORT) Port Number of the host
Initial value: 443
Range of available number: 1-65535
COM-TEST
(Communication Test) Execution of Communication test
Communication test starts when you select (touch) this and press the [OK]
key.
e-RDS tries the connection with the host, and displays the result by "OK!"
or "NG!". (NG: No Good, the communication test is failed)
COM-LOG
(Communication Log) The result of communication test
When this is selected (touched), and the blank rectangle on right side is
selected, it switches to "Log list screen".