manualshive.com logo in svg

Canon IMAGERUNNER 7086, Service Manual

Share
Download
Canon IMAGERUNNER 7086 Service Manual Download Page 325

Chapter 10

10-11

F-10-13

4) Disconnect the connector [3], and remove the

two screws [4]; then, detach the vertical path
drive assembly [5].

F-10-14

10.5.5 Waste Toner Drive Assembly

10.5.5.1 Removing the Waste Toner Drive 

Assembly

0010-9591

Construction

F-10-15

1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the drum drive assembly.

7) Remove the six screws [1], and detach the

waste toner drive assembly [2].

F-10-16

10.5.6 Multifeeder Pickup Drive Assembly

10.5.6.1 Removing the Multifeeder Pickup 

Drive Assembly

0010-9593

Construction

F-10-17

1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Loosen the mounting screw on the rear fixing

plate of the registration roller assembly.

4) Remove the four screws [1], and disconnect

the four connectors [2]; then, detach the
multifeeder pickup drive assembly [3].

F-10-18

[1]

[2]

[5]

[4]

[4]

[3]

[2]

[1]

[1]

[1]

[2]

[2]

[2]

[2]

[1]

[1]

[1]

[1]

[3]

Summary of Contents for IMAGERUNNER 7086








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands