manualshive.com logo in svg

Canon IMAGERUNNER 7086, Service Manual

Share
Download
Canon IMAGERUNNER 7086 Service Manual Download Page 264

Chapter 8

8-31

8.9 Delivery

8.9.1 Reversal Delivery

0010-8225

The copier discharges paper either in face-up delivery or in face-down delivery mode.

T-8-23

F-8-52
T-8-24

Delivery

Copying operation

Face-up

- Making copies on transparencies
(However, the images will be mirror images.)
- USER MODE
Setting the face-up delivery mode by Printer Settings > Settings > Face Up/Down

Face-down

- Other than above

Parts (notation)

Description

Main motor (M1)

Drives the feeding roller.

Delivery flapper solenoid (SL3)

Turns on in face-up mode to lead paper to the delivery assembly.

Delivery speed switching clutch (CL21) Turns on in reversal delivery mode to speed up the rotation of the external 

delivery roller.

Reversing flapper solenoid (SL11)

Turns off in reversal delivery mode to lead paper to the reversing 
assembly.

Reversal motor (M11)

Moves paper to the reversing assembly.

CL21

SL11

M1

M11

SL3

Main
motor

Reversal motor

One-way
clutch

Delivery flapper solenoid

Delivery speed
switching clutch

Reversing
flapper solenoid

Reversing assembly

Summary of Contents for IMAGERUNNER 7086








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands