Canon IMAGERUNNER 7086, Service Manual

Page: 402 / 615

Chapter 14
14-25
14.8 Pickup/Feeding System
14.8.1 Orientation of the Deck/Cassette
Pickup Roller
0010-9337
The deck/cassette pickup roller may be mounted
by reversing the steps used to remove it; however,
keep the following in mind:
- The pickup rollers used at the front and the rear
of the machine are not interchangeable.
- The collar of the pickup roller used at the front
of the machine is gold-colored.
When mounting the pickup roller [1] to the pick-
up assembly, be sure that the round marking [2]
found on the side of the roller and the round
marking [3] on the collar (gold-colored) are to-
ward the front of the machine.
F-14-50
- The collar of the pickup roller used at the rear is
silver-colored. When mounting the pickup
roller [4] to the pickup assembly, be sure that
the round marking [5] on the side of the roller
and the round marking [6] on the collar (silver-
colored) are toward the rear of the machine.
F-14-51
14.8.2 Orientation of the Deck/Cassette
Separation Roller
0010-9338
When replacing the separation roller, be sure that
it is oriented as shown
F-14-52
14.8.3 Orientation of the Feeding Roller of
the Deck/Cassette Pickup Assembly
0010-9339
When mounting the feeding roller assembly to
the deck/cassette pickup assembly, be sure that
the belt pulley [2] is to the front of the machine.
When mounting the feeding roller [3] to the feed-
ing roller shaft [4], be sure that the round marking
[5] is toward the front of the machine.
F-14-53
14.8.4 Orientation of the Pickup Roller of
the Manual Feed Tray/Side Paper
0010-9340
The pickup roller may be mounted by reversing
the steps used to remove it; however, keep the fol-
lowing in mind:
- The pickup rollers used at the front and the rear
of the machine are not interchangeable.
- The collar of the pickup roller used at the front
of the machine is silver-colored.
When mounting the pickup roller [1] to the pick-
up assembly, be sure that the round marking [2]
of the color (silver-colored) is toward the front of
the machine.
F-14-54
[1] Pickup roller
[2] Marking (collar)
- The collar of the pickup roller used at the rear of
the machine is gold-colored.
When mounting the pickup roller [4] to the pick-
up assembly, be sure that the round marking [5]
on the side of the roller and the round marking [6]
on the collar (gold-colored) are toward the rear of
the machine.
F-14-55
[4] Pickup roller
[5] Marking (roller)
[6] Marking (collar)
(direction of rotation)
[1] Collar (gold)
(front of machine)
[2]
[3]
(direction of rotation)
Collar (silver-colored)
(rear of machine)
[4]
[5]
[6]
Wider notch
Narrower notch
(front of machine)
[2]
[1]
[4]
[3]
[5]
(front)
(direction of rotation)
[1]
[2]
Collar (silver-colored)
(front of machine)
(direction of rotation)
Collar (gold-colored) (rear of machine)
[5]
[6]
[4]