manualshive.com logo in svg

Canon IMAGERUNNER 7086, Service Manual

Share
Download
Canon IMAGERUNNER 7086 Service Manual Download Page 326

Chapter 10  

10-12

10.5.7 Lifter Drive Assembly

10.5.7.1 Removing the Lifter Drive 

Assembly (right deck)

0010-9594

Construction

F-10-19

1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the screw, and loosen the harness

guide [1]; disconnect the two connectors [2],
and remove the four screws [3]; then, detach
the lifter drive assembly (for the right deck) [4].

F-10-20

10.5.7.2 Removing the Lifter Drive 

Assembly (left deck)

0010-9596

Construction

F-10-21

1) Remove the rear cover.
2) Open the main controller box assembly.
3) Remove the DC controller assembly.

4) Disconnect the three connectors [1], and

remove the four screws [2]; then, detach the
lifter drive assembly (for the left deck) [3].

F-10-22

10.5.8 Main Drive Assembly

10.5.8.1 Removing the Main Drive 

Assembly

0010-9599

Construction

F-10-23

1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel. 
4) Remove the drum gear. 
5) Remove the waste toner pipe. 
6) Remove the drum drive assembly. 
7) Remove the waste toner drive assembly. 
8) Disconnect the two connectors [1], and remove

the nine screws [2]; then, detach the main drive
assembly [3].

F-10-24

[3]

[3]

[3]

[2]

[2]

[1]

[4]

[1] [1] 

[1] 

[2] 

[2] 

[2] 

[3] 

[2]

[1]

[2]

[2]

[2]

[2]

[3]

[2]

Summary of Contents for IMAGERUNNER 7086








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands