Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 431

Page: 431 / 524

Paper Deck-G1

7-9

Optional Equipment

Load the paper.

IMPORTANT

•

If the paper is curled, curl it down before placing it in the paper deck.

•

Make sure that the height of the paper stack does not exceed the limit mark at the
back of the paper deck.

NOTE

The paper deck holds up to 3,500 sheets of paper (20 lb bond (80 g/m

)).

Close the paper deck.

CAUTION

When returning the paper deck to its original position, be careful not to get
your fingers caught, as this may result in personal injury.

NOTE

For details on print direction of paper already printed with logos or patterns, see
“Relationship between Original Orientation and Preprinted Paper Output Chart,” on
p. 8-19.

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5020 Series

Reviews:

Brands by name

Popular brands

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Search results

Summary of Contents for ImageRunner 5020 Series

Reviews:

Brands by name

Popular brands