Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 338

Page: 338 / 524

LDAP Server Settings

4-114

System Manager Settings

Press [Yes].

The selected LDAP server is erased.

To cancel erasing the LDAP server, press [No].

Press [Done] repeatedly until the Basic Features screen
appears.

Printing LDAP Server Settings

You can print out the LDAP server settings.

NOTE

For more information on the Registered LDAP Server List, see “Registered LDAP Server
List,” on p. 8-10.

Press

(Additional Functions)

➞

[System Settings].

If the System Manager ID and Password have already been set, enter the System
Manager ID and System Password using

(numeric keys)

➞

press

(ID).

Press [

▼

] or [

▲

] until [Store LDAP Server] appears

➞

press

[Store LDAP Server].

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5020 Series

Reviews:

Brands by name

Popular brands

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Search results

Summary of Contents for ImageRunner 5020 Series

Reviews:

Brands by name

Popular brands