manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 350

Loading Paper

5-10

5

Routine Maintenance

4

Squeeze the lever on the front guide, as shown in the 
illustration. Without releasing the lever, slide the front guide to 
align it with the mark for the desired paper size.

IMPORTANT

If the left and front guides are not adjusted properly for the paper size loaded in the 
paper drawer, the correct paper size may not appear on the touch panel display. 
Improperly adjusting the guides may also cause paper jams, dirty prints, or make 
the inside of the machine dirty. To prevent these problems, check that the guides 
are adjusted correctly for the loaded paper size.

5

Load the appropriate paper size into the drawer.

CAUTION

When loading paper, take care not to cut your hands on the edges of the 
paper.

Front guide

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands