manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 345

Loading Paper

5-5

Routine Maintenance

5

IMPORTANT

•

Rewrap any remaining paper in its original package, and store it in a dry place 
away from direct sunlight.

•

Do not load the following types of paper stock. Doing so may cause a paper jam.
- Severely curled or wrinkled paper
- Transparencies
- Paper on which color images have been copied.
- Paper which has been copied on using a digital full color copier (do not copy on 

the reverse side of this paper).

- Paper which has been printed on using a thermal transfer printer (do not copy on 

the reverse side of this paper).

NOTE

•

For high-quality prints, we recommend using Canon paper.

•

Immediately, before loading the paper, fan the pages several times, and align the 
edges to facilitate feeding. Also, you should fan the paper when you remove it from 
a newly opened package.

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands