manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 386

Clearing Paper Jams

6-16

T

roub

leshooting

6

5

Remove any jammed paper.

6

Close the lower right cover.

If the Paper Deck-G1 (Optional) has been moved, reattach the paper deck to the 
main unit. (See “Paper Deck-G1,” on p. 7-3.)

CAUTION

When closing the cover, be careful not to get your fingers caught, as this 
may result in personal injury.

7

Continue to follow the instructions on the touch panel display.

NOTE

The screen indicating how to remove the paper jam will remain displayed, until the 
paper jam has been cleared. (See “Screen Shown When There Is a Paper Jam,” on 
p. 6-2.)

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands