manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 295

Setting Forwarding Conditions (Forwarding Settings)

4-71

System Manager Settings

4

18

Press [Forwarding Done Notice].

19

Select the destination where the forwarding done notice is to 
be sent 

➞

 press [OK].

If a Confidential Fax Inbox is selected as a forwarding destination, this step is not 
necessary.

If Access Number Management for an Address Book is set to ‘On’, press 
[Access Number] 

➞

 enter the access number using

-

(numeric keys) 

➞

 

specify the destination 

➞

 press [OK]. If you do not want to specify an access 

number, press [No Access Number]. (See Chapter 4, “Registering/Editing 
Address Book Settings,” in the 

Sending Guide

.)

Press the alphabet keys (e.g., [ABC]) to display the range of entries.

If the desired destination is not displayed, press [

▼

] or [

▲

] to scroll to the 

desired destination.

Press the Address Book drop-down list to display a list of subaddress books 
(subaddress books 1 to 10 or One-touch Buttons). Subaddress books categorize 
the addresses stored in the Address Book.

You cannot select multiple destinations.

0

9

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands