manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 35

Installation Location and Handling

1-3

1

Bef

ore 

Y

ou Star

t Using 

This Machine

Installation Location and Handling

This section describes precautions for installation location and handling. We 
recommend that you read this section prior to using this machine.

Installation Precautions

Avoid Installing the Machine in the Following Locations

■

Avoid locations subject to extremes of temperature and humidity, whether 
low or high.

For example, avoid installing the machine near water faucets, hot water heaters, 
humidifiers, air conditioners, heaters, or stoves.

■

Avoid installing the machine in direct sunlight.

If this is unavoidable, shade the machine using curtains. Be sure that the curtains do not 
block the machine’s ventilation slots or louvers, or interfere with the electrical cord or 
power supply.

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands