manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 376

Clearing Paper Jams

6-6

T

roub

leshooting

6

Copy Tray-C3

See “Clearing Paper Jams in the Copy Tray,” on p. 7-44.

3

After you have cleared all paper jams at the locations 
indicated on the touch panel display, restore all levers and 
covers to their original positions.

4

Continue operations, following the instructions displayed on 
the touch panel display.

If there is remaining paper to be removed, a screen indicating how to clear the 
paper jam appears on the touch panel display. Repeat the procedure from
step 1.

Printing resumes after all indicated paper jams are cleared, unless there is still a 
paper jam in the feeder.

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands